Comtorgage

GAGE OPTIONS

Options that are not illustrated include special marking, color coding, and plug ground straight at zero.


Longer than normal inreach

TABLE BELOW SHOWS MAXIMUM INREACH AVAILABLE, DEPENDING ON PLUG DIAMETER.

PLUG DIAMETER
MAX. INREACH
TYPE OF PLUG
DESIGN
.1250 TO .1699"
1.5"
1
.1700 TO .3439"
3"
2 & 3
.3440 TO .8699"
9"
4 & 5
.8700 TO 15.9999"
19"
6 THRU 9


plugs

 

Lead Chamfer
Lead Radius
(not available
on Carbide Inserts)
Back of Head Relief
Lead Chamfer
Lead Radius

Back of Head Relief

To clear the radius or undercut at the bottom
of blind or counterbored holes.

 

 For shallow bore lengths less than gage head length, relief is ground to make head slightly shorter than part bore. This eliminates the possibility of gaging errors due to expansion plug wear.

Chrome Plating
Chrome Plating

Prevents rusting and aids in resisting wear.

 

Carbide Inserts
Carbide Inserts
Available on plugs .250" and larger.

For part surfaces that are highly abrasive, Raised Carbide Inserts are added to the gage contact area.
Spherical Contacts

Spherical Contacts

For gaging soft work pieces, fine surface finishes, or large bores.
front stop
For visual depth control.
 To clear the radius or undercut at the bottom of blind or counterbored holes or stepped diameters.
DEPTH STOP SHOULDER
Depth Stop Shoulder
For short thru holes or to check diameter at a prescribed gage depth from entrance face.
Optional Relief at base of Depth Stop Shoulder to clear sharp corner or burr.

Locator Support Sleeve

Fixed Sleeve Stop
HOME